If suddenly your iPhone stops ringing, this is a terrible problem. It happened to a lot of people, and for most of them, it was a mistake because they rejected the volume or sent the iPhone to “Do Not Disturb” mode, but for some of them, it was a real iOS problem. So don’t worry too much, because all the fixes are discussed below in this article.
You can start with a simple setup problem, but if you think this is a major software problem, there is also a solution. However, if your iPhone does not ring, please check the fix below.
If you feel frustrated because the iPhone won’t ring, then don’t worry, this is the first of many upcoming solutions. Try not to worry too much and conclude that it is the main problem, even because of simple mistakes.
So, just stop screaming “My iPhone won’t ring” and find out if you turned on the silent mode by mistake.
Take a closer look at the side of your iPhone; if an orange strip appears on the ring switch, it means your device is in silent mode. You just need to flip that switch and everything will return to normal.
If you ask “Why doesn’t my iPhone ring”, you may turn on “Do Not Disturb”. If you can turn it off, the iPhone will ring again.
Now, take a close look at your iPhone screen, and if you see the half-month sign next to the battery sign, turn on “Do Not Disturb”. Activating this mode means that as long as this mode is on, you will not be disturbed by incoming calls.
Here’s how to turn off “Do Not Disturb”:
Go to the “Settings” of your iPhone and scroll down until you see “Do Not Disturb”.
Tap it, and then tap the slider next to “Manual” to turn it off.
If the iPhone ringer does not work, then you can restart the iPhone, hoping that it will solve the problem with the device. It is known that restarting the device can solve minor problems with the device, so you can give it a try.
iPhone 6 and earlier: Just press and hold the power button until the slider appears, slide it, and the device will shut down. Then, turn it back on again.
iPhone 7/7 Plus: Press and hold the power button of the iPhone 7 until you can see the slider. Wait a few seconds, then press and hold the power button again to turn it back on.
iPhone 8 and later: Use any volume button to press the power button, and a slider will appear. Slide it to turn off the device, and then turn it back on again.
It is possible that a simple restart may solve the problem you are currently experiencing on the iPhone, if not, proceed to the next repair.
If your iPhone fails to ring during a specific call, you may have forgotten the number because you intentionally blocked the number, or you accidentally blocked the number. So, if you want to unlock that number, then
Step 1: Go to “Settings” of iPhone and tap “Phone”. Then, go to “Call Blocking and Identification”
Step 2: There, you will see a list of blocked callers, click “Edit”.
Step 3: There will be a “red circle” next to the blocked number, just click on it.
Step 4: Now you can see the unlock button, tap it.
Therefore, if you do not get a ringtone on that particular call, then unblocking the number through these steps will solve the problem.
If all the above fixes do not work, then iOS may have a big problem because it will not ring. Therefore, use the iOS repair tool to solve iOS issues. You can use Tenorshare ReiBoot, which is an excellent iOS repair tool that can solve device problems within minutes without any data loss.
Step 1: Download ReiBoot from the website, and then install it.
Step 2: Connect the iPhone to the computer, and then launch the program.
Step 3: ReiBoot will detect the device immediately, and then select “Repair Operating System” from the menu.
Step 4: Click “Start Repair” to continue from the following on-screen guide.
Step 5: Now, you need to download the firmware package from the Internet. Therefore, select a specific location and click “Download”.
Step 6: After the download is complete, click “Start Repair” to start the iOS system recovery.
Now that you have used ReiBoot to fix the iPhone’s ringtone problem, you can freely change or set a new ringtone. Many users don’t know how to change the ringtone on iPhone, but it is very simple, in fact, you can change the current ringtone in just a few simple steps.
Here’s how to set ringtones on iPhone:
Step 1: Go to “Settings” of iPhone and tap “Sounds and Haptics”.
Step 2: Then, click “Ringtone” in the “Sounds and Vibration” section.
Step 3: In the ringtone menu, you will find a long list of ringtones, as well as a ringtone currently being used by the device.
Step 4: In this ringtone page, you can set a new ringtone for iPhone from the ringtone list.
Step 5: However, if you don’t like the ringtones in the list, then you have to click on the tone store and buy a new tone.
Therefore, you can return to the main screen after selecting the ringtone, and your tone selection will be automatically saved.
Therefore, if the iPhone stops ringing, then this is a very serious problem. If you turn on the silent mode by mistake, then you will be able to fix it with the above solutions, but if it is an iOS problem, then you must use ReiBoot to solve the problem immediately, otherwise, you will miss a lot of important calls.